embalish knit

i have a prym version of this as well only difference is prym version had a weight with a hook on it which i found didnt work for me

i do use both with the embellish knit clip weight i have got it to work but do suggest someone else reads the instruction leaflet and then tell you to do

thread through hole in the side where the notch is
and push gently down the middle hole in the middle

use plenty of yarn as its best to have a lot
once yarn is out the bottom place clip weight on it as close to the machine
worked best

cast on
wined handle till one needle is opposite the noch
and let yarn catch by hook

wind twice so u have 1 empty hook
let hook catch yarn ( should be oppsite e.g. hook 1 and 3 )

turn handle back but dont put yarn on hook

turn again and let yarn catch

thats the first part to casting on

when yarn reaches hook 2 this time it needs to catch . u may need to pull the weighted end and adjust the weight

turn handle so yarn catches hook 3
turn handle and make sure yarn catches hook 4
turn handle and yarn at hook 1 again

cast on part 2 should now be complete and all four hooks now hold yarn

the hooks all have flick catches to hold yarn in place.

adjust weight if needed on the yarn hanging out the bottom of the embellish knit .

now just turn the handle,

the prym works the same way except the weight is made different u ether do a loose knot through the weight or tie yarn to the hook on the weight

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s